Operation Manual

302 Service, Maintenance
Coolant temperature
Control indicator W illuminates when
coolant temperature is too high. Check
coolant level immediately:
z Coolant level too low:
Ad d coolant, see notes under "Antifreez e
and corrosion protection", and "Coolant
level". Have a workshop eliminate the
cause of the coolant loss.
z Coolant level OK:
Have the cause of the raised coolant
temperature eliminated. Contact a
workshop.
Picture no: 17314t.tif
Brake fluid
Brake fluid level
The fluid level in the reservoir must be
neither higher than the MAX mark nor
lower than the MIN mark.
The use of certain brake fluids can cause
damage or loss of braking power. We
therefore recommend the use of high-
performance brake fluid that has been
approved.
When topping up, ensure maximum clean-
liness as contamination of the brake fluid
can lead to function problems in the
braking system.
After correcting the brake fluid level, have
a workshop eliminate the cause of the
brake fluid loss.
9 Warning
Caution – brake fluid is poisonous and
corrosive. Do not allow it to come into
contact with eyes, skin, fabric or painted
surfaces. Direct contact could cause
injury and damage.