Operation Manual

279Self-help, Vehicle care
Picture no: 18458t.tif
9. Ensure that the seals are applied to the
bulb holder and fixing screws.
Picture no: 17289t.tif
10.Insert the bulb housing in the body,
engaging the lug and the ball pin in the
recesses. Tighten the fastening nuts
using a wheel bolt wrench 3. Attach the
plug connector. Close and engage the
flap.
11.Carry out the following steps to ensure
proper function of the tail lights:
– Switch on ignition
– Operate brake
– Switch on parking lights