Operation Manual

278 Self-help, Vehicle care
Picture no: 17286t.tif
5.Unscrew three screws using a screw driver
(vehicle tools – see page251). Press
locking tabs on outside of bulb holder
inward and remove the bulb holder.
Picture no: 17287t.tif
Bulbs in bulb holder:
6.Remove bulb from socket.
7.Insert new bulb, without touching the
glass.
8. Engage bulb holder in bulb housing,
ensuring that it properly engages. Insert
three screws with washers and tighten as
far as possible.
1 = Reversing light
2 = Turn signal
3 = Tail light/brake light
4 = Tail light
5=Fog tail light