Operation Manual

219Driving and operation
Picture no: 17353t.tif
A graphic indicating the left rear tyre is
shown together with the current tyre
pressure: Slight pressure deviation, reduce
speed. Check pressure at next opportunity
with appropriate gauge and correct if
necessary.
On the colour information display this
report will appear in yellow.
Picture no: 17354t.tif
A graphic indicating the front left tyre is
shown together with the current tyre
pressure: Significant pressure deviation or
direct pressure loss! Steer out of flow of
traffic as quickly as possible without
endangering other drivers. Stop and check
the tyres.
Mount the spare wheel 3 if necessary - see
pages 249, 252. A maximum speed of
50 mph (80 km/h) is permitted for run-flat
tyres 3. Observe the information on
page 229.
On the colour information display this
report will appear in red.
Acknowledgement of warnings – see
page 130.
Picture no: 17018t.tif
Control indicator w
If control indicator w illuminates yellow
while driving, there is a fault in the tyre
pressure monitoring system . Fitting a w heel
without pressure sensor (e.g. spare
wheel 3) will also generate a fault in the
system. Have the cause of the fault
remedied by a workshop. The system’s
integrated self-diagnostics allows faults to
be quickly remedied.
Navi active
Tyre pressure
OK
check rear
left
(value in bar)
Navi active
Attention!
OK
Fron t left tyre
pressure loss
(value in bar)