Operation Manual

15In Brief
Picture no: 17001t.tif
Manual transmission:
Reverse: with the vehicle stationary, wait
3 seconds after de-clutching and then pull
up the button on the selector lever and
engage the gear.
If the gear does not engage, set the lever in
neutral, release the clutch pedal and
depress again; then repeat gear selection.
Picture no: 17002t.tif
Easytronic 3:
The selector le ver must always be mov ed in
the appropriate direction as far as it will
go. Upon release, it automatically returns
to the centre position. Pay heed to the
gear/mode indicator in the transmission
display.
The foot brake must be depressed when
starting.
6 Easytronic 3 – page176.
Picture no: 17003t.tif
Automatic transmission 3:
Starting only possible in P or N. To move
from P, switch on ignition, depress foot
brake and press button on selector lever.
Press button on selector lever to engage P
or R.
6 Automatic transmission 3 – page 184.
N=Idle
o =Drive position
+ = Higher gear
- = Lower gear
A/M = Change between
Automatic and Manual
mode
R = Reverse gear (with
selector lever lock)
P=Park position
R=Reverse gear
N=Neutral (idle)
D = Automatic gear selection
3 = 1st to 3rd gear
2 = 1st and 2nd gear
1=1st gear
P only when vehicle is stationary, first
apply handbrake
R only when vehicle is stationary