Operation Manual

169Climate control
Picture no: 17000t.tif
Automatic mode
Basic setting for maximum comfort:
z Pre ss AUTO button.
z Open all air vents.
z Air conditioning compressor activation –
see page171.
z Set pre-selected temperature to 22 °C
using left rotary knob.
The temperature can be set higher or lower
as desired.
Switching off the AC compressor (Eco
appears in display) can reduce comfort
and affect safety – see page171.
All air vents are actuated automatically in
automatic mode. The air vents should
therefore always be open – see page 156.
Automatic air recirculation mode 3
The ventilation system is set to recirculation
mode and interior air is recirculated.
The automatic air recirculation system has
an air quality sensor to detect harmful
gases in the outside air, in which case it will
switch automatically to recirculation.
If outside temperatures are low and
cooling (air conditioning compressor) is
switched off, automatic air recirculation is
only available in a limited capacity so as to
prevent the windows from misting. Activate
recirculation manually if so desired.
Switching automatic recirculation on or
off – see page 173.
Manual recirculation mode – see page 173.