Operation Manual

164 Climate control
Picture no: 17932t.tif
Automatic mode
Basic setting for maximum comfort:
z Set fan switch to A.
z Set air distribution switch to desired
position - see next column.
z Use rotary switch to set temperature
to 22 °C (a higher or lower temperature
can be set as desired).
z Air conditioning compressor activation –
see page165.
z All front air vents open. If desired, the
rear vents a lso 3.
Deactivation of the air conditioning
compressor ca n reduce the level of comfort
and safety - see page 165.
Picture no: 17933t.tif
Air distribution
Adjust with left rotary switch.
Intermediate settings are possible.
Open the air vents when the switch is
set to L or M.
Picture no: 17934t.tif
Temperature p reset
Adjust with centre rotary switch.
Set the rotary switch to a value between
17 °C and 27°C. Intermediate settings are
possible.
The selected temperature is maintained.
For reasons of comfort, temperature can
only be changed in small increments.
There is no temperature control for settings
below 17 °C (all the way left) or
above27 °C (all the way right). The air
conditioning system works at maximum
cooling or heating.
L to head area via adjustable vents,
to footwell
M to head area via adjustable vents
l to windscreen and front door
windows
J to windscreen and front door
windows, to footwell
K to footwell