Operation Manual

283Self-help
5. Unscrew three screws using a screwdriver
(vehicle tools – page 256). Press locking
tabs on outside of bulb holder inward
and remove the bulb holder.
Bulbs in bulb holder:
1 = Reversing light
2 = Turn signal
3 = Tail light/brake light
4 = Tail light
5 = Fog tail light
6. Remove bulb from socket.
7. Insert new bulb, without touching the
glass.
8. Engage bulb holder in bulb housing,
ensuring that it properly engages. Insert
three screws with washers and tighten as
far as possible.