Operation Manual

20 In Brief
Manual transmission:
Reverse: with the vehicle stationary, wait 3
seconds after declutching and then pull up
the button on the selector lever and
engage the gear.
If the gear does not engage, set the lever in
neutral, release the clutch pedal and
depress again; then repeat gear selection.
Easytronic 3 :
N = Idle
o =Drive position
+ = higher gear
- =lower gear
A = Change between
Automatic and
Manual mode
R = Reverse
(with selector lever lock)
The selector lever must always be moved in
the appropriate direction as far as it will
go. Upon release, it automatically returns
to the centre position. Pay heed to the
gear/mode indicator in the transmission
display.
The foot brake must be depressed when
starting.
6 Easytronic 3 – Page 178.
Automatic transmission 3 :
P = Park
R = Reverse
N = Neutral (idle)
D = Automatic gear selection
3 = 1st to 3rd gear
2 = 1st and 2nd gear
1 = 1st gear
Starting only possible in P or N . To move
from P, switch on ignition, depress foot
brake and press button on selector lever.
Press button on selector lever to engage P
or R.
P: Only with vehicle stationary, first
apply hand brake
R: Only with vehicle stationary
6 Automatic transmission 3 – page 186.