Operation Manual

164 Vehicle care
2. Rotate the bulb holder
anticlockwise to disengage.
Withdraw the bulb holder from the
reflector.
3. Disengage the bulb holder from
the plug connector by pressing
the retaining lug.
4. Replace the bulb and connect
bulb holder with the plug
connector.
5. Insert the bulb holder, engaging
the two lugs into the reflector and
rotate clockwise to secure.
6. Fit the cap and rotate clockwise.
Front turn signal (2)
1. Rotate cap (2) anticlockwise and
remove it.
2. Rotate bulb holder anticlockwise
and remove.
3. Remove the bulb from the socket
by turning anticlockwise.
4. Replace and insert new bulb into
socket by turning clockwise.
5. Insert the bulb holder into the
reflector and turn clockwise.
6. Fit the cap and rotate clockwise.