Operation Manual

Driving and operating 119
Conditions for an Autostop
The stop-start system checks if each
of the following conditions is fulfilled.
Otherwise an Autostop will be
inhibited.
The stop-start system is not
manually deactivated
the bonnet is fully closed
the driver's door is closed or the
driver's seat belt is fastened
the battery is sufficiently charged
and in good condition
the engine is warmed up
the engine coolant temperature is
not too low
the ambient temperature is not too
low
the defrosting function is not
activated
the climate control system does not
inhibit an engine stop
the brake vacuum is sufficient
the vehicle has moved since the
last Autostop
New vehicle running-in 3 116.
Battery discharge protection
To ensure reliable engine restarts,
several battery discharge protection
features are implemented as part of
the stop-start system.
Restart of the engine by the
driver
Depress the clutch pedal to restart the
engine.
The engine start is indicated by the
needle at the idle speed position in
the tachometer.
If the selector lever is shifted out of
neutral before depressing the clutch
first, control indicator - illuminates
or is shown as a symbol in the Driver
Information Centre.
Control indicator - 3 87.
Restart of the engine by the
stop-start system
If one of the following conditions
occurs during an Autostop, the
engine will be restarted automatically
by the stop-start system.
The stop-start system is manually
deactivated
the bonnet is opened
the driver's seat belt is unfastened
and the driver's door is opened
the engine temperature is too low
the battery is discharged
the brake vacuum is not sufficient
the vehicle starts to move
The defrosting function is activated
the climate control system requests
an engine start
Overrun cut-off
The fuel supply is automatically cut-
off during overrun, i.e. when the
vehicle is driven with a gear engaged
but accelerator is released.
Parking
Always apply the electrical parking
brake.
Pull switch m.