Operation Manual

Instruments, controls 67
r
Parking distance sensors 3
Illuminates in yellow when ignition is
switched on.
If it stays illum inated while driving, there is
a fault in the system - see pag e 139.
5
DCS (Descent Control System)
Both control indicators illuminate w hen
ignition is switched on.
Green; illuminates when DCS is ready for
operation. Flashes during driving when
DCS is in operation, after pressing the
DCS button.
Yellow; flashes to indicate system is not
rea dy for conditions to operate.
Illuminates to indicate there is a fault in the
system.
If the yellow control indicator flashes or
illuminates during d riv ing, friction material
needs to cool down: drive the vehicle
without braking as much as possible.
Further information - see page 135.
B
AWD (All Wheel Drive) 3
Illuminates in yellow when ignition is
switched on, then extinguishes.
If it flashes during driving, the AWD system
is temporarily disabled.
If it illum ina tes, there is a fault in the
system. Consult a workshop as soon as
possible.
Further inform ation - see page 118.
7
ESC Activ e & W arning
(E lectronic Stabil ity Control)
see p age 133.
A
ESC Not Read y
see p age 133.
J
ESC OF F
see p age 133.
q
Automatic headlight range adjustment 3
Illuminates in yellow when ignition is
switched on, then ex tinguishes.
Comes on during driving to indicate a fault
that requires immediate attention. Consult
a work shop as soon as possible.
Further information - see pag e 94.
W
C ool ant temp era ture
Illuminates in red when ignition is
switched on, the n ex tinguishes.
If it illuminates w hen the engine is running:
stop vehicle and switch off engine. C oolant
temperature is too high; danger of engine
dam age. Check coolant level.
Further information - see pag e 192.
9 Warnin g
Allow engine to cool down before
removing c oolant filler cap.