Operation Manual

Seats, interior42
Using the belts
Fitting the belt
Pull the belt out evenly from the retractor
and guide it over the shoulder, making
certa in that it is not twisted.
Insert the la tch plate into the buckle.
The seat backrest must not be tilted back
too far (the recom mended m aximum tilting
angle is approx. 25°).
The lap belt m ust not be twisted and must
fit snugly across the body. Tension the belt
frequently whilst driving by tugging the
diagonal part of the belt.
Keep knees pointing straight forward so
that driver’s side knee bolsters can help
prevent submarining under the seat belt in
the event of a collision.
Bulky clothing prevents the belt from fitting
prop erly. The belt must not rest against
ha rd or fragile objects in the pockets of
your clothing (e.g. ballpoint pens, keys,
spectacles) because these could cause
injury in the event of a collision. Do not
place any objects (e.g . handbags) between
the belt and your body .
F ro nt p ass enge r’s se at be lt rem inde r k 3
Illuminates for approx. 4 seconds when
ignition is switched on.
When the engine is running, if the front
passenger’s seat is occupied and the b elt is
not enga ged, the control indicator will
flash for approx. 90 seconds and then
illuminate until the belt is fastened
correc tly (control indicator will extinguish
imm ediately).
If v ehicle speed exceeds approx. 14 mph
(22 km/h), the control indicator will fla sh for
app rox. 90 second s along with a warning
chime, and then illum inate until front
passenger’s seat belt is fastened.
Control indicator X for driver’s seat belt
re minder - see pa ge 6 8.
9 Warning
On pregnant women in particular,
the lap b elt must be positioned as low a s
possible across the pelvis in order to
prevent pressure on the abdomen.