Operation Manual

Self-help, vehicle care184
Xenon headlight system 3
Halogen headlights A can be identified
from Xenon headlights B by the d iffe rent
lens layout.
Sidelight s
1. Remove headlight assembly -
see page 182.
2. Rotate bulb holder anticlockwise and
withdraw bulb holder from light
assembly.
3. Remove bulb from bulb holder by pulling
it straight out.
4. Install new bulb, using a lint-free cloth to
hold bulb.
5. Reinstall bulb holder in light assembly by
rotating it clockwise.
6. Reinstall hea dlight assembly.
Front turn signa l light s
1. Remove headlight assembly -
see page 182.
2. Rotate bulb holder anticlockwise and
withd raw bulb holder from light
assembly.
3. Press and rotate bulb anticlockwise to
remove it from bulb holder.
4. Install new bulb into bulb holder by
pressing and rotating it clockwise.
5. Reinsta ll bulb holder in light assem bly by
rotating it cloc kwise.
6. Reinstall headlight assembly.
9 Wa rning
Xenon headlights operate at very high
voltages. Do not touch; risk of fatal injury.
Have dipped beam and main beam
repaired by a workshop only.