Operation Manual

Self-help, vehicle care182
Bulb replacement
Before replacing a bulb, switch off ignition
and relevant switch.
Only hold new bulbs at base! Do not touch
the bulb glass with bare hands, otherwise
fingerprints on the g lass evaporate and
residue builds up on the reflector
eventually resulting in a dull reflector.
Inadvertently stained bulbs ma y be
cleaned with a clean lint-free cloth, using
alcohol or w hite spirit.
Replacement bulb must be in accordance
with data on base of d efec tive bulb. Do not
exceed wattage given on bulb base.
Headlight aiming
We rec om mend that headlight aiming be
carried out by a workshop, which will have
special equipment.
When aiming your headlights, the manual
headlight range adjustment 3 must be set
to 7.
Headl ight removal
For bulb replacement, it is necessary to first
remove the hea dlight assembly.
1. Switch off ignition a nd headlight switch.
2. Open the bonnet, release the 11
retainers and remove the radiator cover.
3. Remove 3 bolts and withdraw headlight.
4. Depress harness connector tags and
disconnect headlight wiring.
5. Remove the headlight assembly .
Headlight assembly installation is the
reverse of removal - ensure locating dowel
aligns with its socket.
Do not overtig hten bolts or retainers.
No. C ircuit Rating
22
Electric seat 30 A
23
Battery 60 A
24
Defogger 30 A
25
Dipped beam (left side) 15 A
26
Dipped beam (right side) 15 A
27
Sidelight (left side) 10 A
28
Front fog lights 15 A
29
Main beam 15 A
30
Rear wiper 20 A
31
--
32
Headlight wash 20 A
33
Transm ission Control
Module
15 A
34
Trailer / Sidelight
(left side)
10 A
35
Sp are 25 A
36
Sp are 20 A
37
Sp are 15 A
38
Sp are 10 A