Operation Manual

Driving and o peration 163
Inserting the coupling ba ll bar
Insert the coupling b all bar into the
coupling housing and push firmly
downwards until the coupling ball bar
audibly engages.
If it does not engage, repeat fitting
procedure.
Do not swing the coupling ball bar to the
left or right, or upwards and downwards, to
avoid disrupting correct fitting.
Lock coup ling ball bar by turning the
supplied key in the lock cylinder of the
coupling b all bar.
Remove key.
Important
Check tha t the coupling ball bar is correctly
attached:
z Green marking must be visible on lever.
z Coupling ball bar must b e sea ted firmly
in co up lin g ho us ing.
Coupling b all bar must be locked and key
must be removed.
Eye for breakaway stopping cable 3
In the case of cara vans / trailers with
brak es 3, attach the breakaway stopping
cable to the eye - not the coup ling ball b ar.
9 Warnin g
Tow ing a caravan / trailer is only
permitted with a p roperly attached
coupling ball bar. If the coupling ball bar
cannot be properly attached, consult a
workshop.