Operation Manual

Driving and o peration 157
Attach the p edal cra nk by rotating the
attachment screw on the p edal crank
mount.
Place the wheel recesses such that the
bicycle is more or less horizontal. Here, the
distance betw een the pedals and the
tailg ate should be at least 5 cm . Setting the
whee l rece sses - s ee pa ge 15 5.
Both b icycle tyres must be in the wheel
recesses. In order to prevent da mage,
neither the pedal bearing housing on the
bicycle nor the pedal crank should be
touching the pedal crank recess.
Align the bicycle in the longitudina l
direction of the vehicle:
Slightly loosen the pedal bearing mount -
see page 154, Fig. 14629 S.
Place the b icycle upright using the rotary
lever on the ped al crank recess -
see page 154, Fig. 14629 S or page 155,
Fig. 14630 S.
If the two bicycles obstruct one another,
the relativ e positions of the bicycles can be
ada pted by adjusting the wheel recesses
and the rotary lever on the ped al crank
recess until the bicycles no longer touch
one anoth e r. Make sure there is sufficient
clearance from the vehicle.