Operation Manual

Driv in g and op e ra tio n144
Handbrake
Always apply handbrake firm ly. On slopes,
apply the handbrake as firmly as possible.
The mechanical handbrake acts on the
brake s on the rea r whee ls. It engag es
automatically when applied.
To release the handbrake, press and hold
the b utton, pull the lever up slightly and
lower lever while holding the button in.
To red uce the op erating forces of the
handbrake, depress the footbrake at the
same time.
Control ind icator 4 for brake system
Illuminates when ignition is switched on.
Extinguishes after engine is started.
Illuminates if hand brake is a pplied and/or
fluid level for brake hydraulics is too low.
Brake fluid level - see page 193.
If the control indicator stays lit, the brakes
do not operate a s normal or leaks are
found in the brake system, do not attem pt
to drive the vehicle. Have the vehicle towed
to a workshop for insp ection and repair.
If the control indicator does not illuminate
when the ignition is switched on or when
the handbrake is applied (with ignition on),
stop and consult a workshop.
9 Warning
If it illuminates when the hand brake is not
applied: stop vehicle, interrupt your
journey im mediately.
Check bra ke fluid level and top-up if
necessary before consulting a workshop.
Have cause of brake fluid loss rem edied.