Operation Manual

Climate control104
Vent ilation
z Turn air recircula tion mode 4 off.
z For maximum ventilation to head area:
set air distribution rotary k nob to M.
z For ventilation to footwell:
set air distribution rotary k nob to K.
z For simultaneous v entilation to head
area a nd footwell:
set air distribution rotary k nob to L.
z Turn temperature rotary knob to blue
area for cooling.
z Set fan to desired speed.
z Open adjustable centre and side air
vents.
Heating
The amount of heat is depend ent on the
engine temperature and is thus not fully
attained until the engine is warm.
For rapid warming of the p assenger’s
compartment:
z Activate air recirc ulation mode 4.
z Set the air distribution rotary knob to
K or L .
z Turn temperature rotary knob to red
area for warm air.
z Set fan to 4.
z Open ad justable side air vents.
Do not use this setting for extended
periods, as gradual d eterioration in air
quality and an increase in humidity m ay
cause windows to mist up.
To obtain a temperature for a "cool head
and warm feet" effect:
z Turn air recirculation m ode 4 off.
z Set the air distribution rotary knob to L .
z Turn tempera ture rotary knob to the
middle.
z Set fa n to desired speed .
z Open adjustab le centre and side air
vents.
The comfort and general wellb eing of
vehicle occupants are to a large extent
dependent on a suitab le v entilation and
heating setting.