Operation Manual

Climate control 10 1
Air vents
Pleasant ventilation to the head area with
unheated or slightly warmed air depending
on the position of the tem perature rotary
knob.
Centre air vents
To open and close a ir vents, turn horizontal
knurled wheel to the left or right.
Open air vents when air distribution rotary
knob is set to M or L .
The air supply is increased by switching on
the fan.
The airflow ca n be directed as desired by
tilting and swivelling the slats up, down
and sidew ays.
Side air vents
To open and c lose air vents, turn horizontal
knurled wheel to the left or right.
Open air vents when air distribution rotary
knob is set to M or L.
Depend ing up on the position of the
temperature rotary knob, cold or heated
air will be direc ted into the vehicle via these
air vents.
The air supply is increased by switching on
the fan.
The airflow can be directed as desired by
tilting a nd swiv elling the slats up, down
and sid eways.
Door window defroster vents
Air distrib ution rotary knob set to l or J ;
cooled or heated air will b e directed onto
the windscreen and onto the door w indows
(mainly in the area of the exterior m irrors).
Rear air vents
Operational when air distribution rotary
knob is set to L, K or J.
Cooled or heated air is directed into the
footwell a rea of the rear pa ssenger
compa rtment.
Keep the area underneath the front seats
clear, to allow airflow to the rear passenger
compa rtment.
Ad ditional air vents
Below the windscreen (defroster vents) and
in the front footwells.