Operation Manual

Instruments, controls 67
r
Parking distance sensors 3
Illuminates in yellow when ig nition is
switched on.
If it stays illum ina ted while driving, there is
a fault in the sy stem - see pag e 138.
5
DCS (Descent Control System)
Both control indicators illuminate w hen
ignition is switched on.
Green; illuminates when DCS is ready for
opera tion. Flashes during driving when
DCS is in operation, after pressing the
DCS button.
Yellow; flashes to indicate system is not
rea dy for conditions to operate.
Illuminates to indicate there is a fault in the
system.
If the yellow control indicator flashes or
illuminates during d riv ing, friction material
needs to cool down: drive the vehicle
without braking as much as possible.
Further information - see page 134.
B
AWD (All Wheel Drive)
Illum inates in yellow when ignition is
switched on, then extinguishes.
If it flashes during driving, the AWD system
is temporarily disabled.
If it illum ina tes, there is a fault in the
system. Consult a workshop as soon as
possible.
Further inform ation - see page 117.
7
ESC Activ e & W arning
(Electronic Stabil ity Control)
see page 132.
A
ESC Not Read y
see page 132.
J
ESC OF F
see page 132.
q
Automatic headlight range adjustment 3
Illuminates in yellow when ignition is
switched on, then ex tinguishes .
Com es on during driving to indicate a fault
that requires immediate attention. Consult
a workshop as soon as possible.
Further information - see pag e 93.
W
C ool ant temp era ture
Illuminates in red when ig nition is
switched on, then ex tinguishes .
If it illuminates w hen the engine is running:
stop vehicle and switch off engine. Coolant
temperature is too high; danger of engine
dam age. Check coolant level.
Further information - see pag e 191.
9 Warnin g
Allow engine to cool down before
removing c oolant filler cap.