Operation Manual

Seats, interior58
FlexOr ganizer 3
Flexible system for dividing the luggage
compartment or securing loads.
The system consists of:
z adapters
z variable partition net
z mes h pocke ts fo r the side walls
z hooks in the lugga ge com partment
Components are mounted in the two guide
rails in the side walls of the luggage
compartment by mea ns of adap ters or
hooks.
Variable partition net
Insert an adapter in ea ch rail: fold up
ha ndle plate, insert adap ter in upper and
low er groove of rails, move to desired
position.
To lock the a dapter, swiv el the hand le
plate up. Compress the rods of the
partition net slightly and insert in
corresponding openings of the adapter.
The longer rod must be inserted in the
up per ad apter.
Hooks and mesh pocket
Insert the hooks in the desired position in
the rails: insert the hook in the upper
groove on the rail a nd press in the lower
groove. The mesh pocket can be hung from
the hooks.
Removing
Press the partition net rods together and
remove from the adapters.
Adapter: fold open the retainer, release the
adapter from the lower groove and remove
from the upper groove.
Release the hooks from the rails.