Operation Manual

Self-help, vehicle care182
Halogen headlight system
Dipp ed and ma in beam
Main beam 1 (inner bulbs) and dip ped
beam 2 (outer bulbs).
1. Remove hea dlight assem bly -
seepage181.
2. Remove headlight cap.
3. Release bulb retaining spring and
remove bulb from reflector housing.
4. When fitting a new b ulb, ensure the lugs
engage correctly with the rec esse s on the
reflector. Do not touch the gla ss.
5. Engage bulb reta ining spring and
replace headlight c ap.
6. Reinstall headlight assembly.
Pa rking lights
1. Remove headlight assembly -
see page 181.
2. Remove headlight cap and withdraw
bulb holder (located next to main beam
bulb) from light assembly.
3. Remove bulb from bulb holder by pulling
it straight out.
4. Install new bulb, using a lint-free cloth to
hold bulb.
5. Reinstall bulb holder in light assem bly
and replace headlight ca p.
6. Reinstall headlight assembly.
Front turn signa l lights
1. Remov e headlight assembly -
see page 181.
2. Rotate bulb holder anticlockwise and
withd ra w bulb holder from light
assembly.
3. Press a nd rotate bulb anticlockwise to
remove it from bulb holder.
4. Install new bulb into bulb holder by
pressing and rotating it clockwise.
5. Reinsta ll bulb hold er in light a ssem bly by
rotating it cloc kwise.
6. Reinsta ll headlight assembly.