Operation Manual

Driv in g and op era tio n162
Inserting the coupling ba ll bar
Insert the coupling b all bar into the
coupling housing and push firmly
downwards until the coupling ball bar
audibly engages.
If it does not engage, repeat fitting
proced ure.
Do not swing the coupling ball bar to the
left or right, or upwards and downwards, to
avoid disrupting correct fitting.
Lock coup ling ball bar by turning the
supplied key in the loc k cylinder of the
coupling b all bar.
Remove key.
Important
Check tha t the coupling ball bar is correctly
attached:
z Green marking must be visible on lever.
z Coupling ball ba r must b e seated firmly
in coup lin g hous ing.
Coupling b all bar must be locked and key
must be remov ed.
Eye for breakaway stopping cable 3
In the case of cara vans / trailers with
brak es 3, attach the breakaway stop ping
cable to the eye - not the coup ling ball bar.
9 Warnin g
Tow ing a carav an / trailer is only
permitted with a properly attached
coup ling ba ll b ar. If the coupling ball bar
cannot be properly attached, consult a
workshop.