Operation Manual

Driv in g and op era tio n116
Fault Z
If a fa ult occurs in the a utomatic
transm ission, control indicator Z will
illuminate in the instrument cluster.
Autom atic shifting may be much harsher
than norm al or, in the case of a serious
fault, cancelled altogether.
Consult a workshop as soon as possible to
have the cause of the fault eliminated.
Interruption of p ower supply
The clutch is not d iseng aged if the vehicle
battery is discha rg ed and a gear has been
selected. The vehicle cannot move.
If the ba ttery is flat, the selector lever
cannot be moved out of position P or N.
Start the vehicle using jump leads -
see page 168.
If the cause of the interruption to the power
supply is not a discharged battery, release
selector lever:
Have c ause of power supply interruption
remedied imm ediately. Consult a
workshop.
1. Turn off ignition and remove key.
2. Dep ress and hold footbrake.
3. Remove cap on console with a suitable
screwdriver.
4. Insert ig nition key a nd press gently into
shift lock relea se slot.
5. Shift to neutral (N).
6. Remove key from shift lock release slot.
7. Start engine and shift to chosen gear.
8. Reinstall cap on c onsole.