Operation Manual

Lighting 91
Picture no: s0013606.tif
Door-to-door lighting function
The dipped beam and reversing lights
illuminate for approx. 30 seconds after the
driver ex its the v ehicle a nd closes the door.
To activate function:
1. Switch off ignition.
2. Remove ignition key.
3. Open driver’s door.
4. Pull turn sig nal stalk tow ards steering
wheel.
If the driv er’s door is left open, the lights will
go out after two minutes.
Door-to-door lighting can be deactivated
by inserting the key in the starter switch or
by pulling the turn signal stalk towards the
stee ring whee l aga in while the driv er’s door
is open.
Picture no: s0013541.tif
Instrument illumination,
information display illumination
Illum inates when ignition is switched on.
Brightness can be adjusted when the
exterior lights are on: turn wheel to the
rig ht or left until the desired brightness is
ob taine d.
If driver’s door is op ened or q is pressed on
the remote control, instrument panel lights
will illuminate automatically and sta y on
for approx. 30 seconds until starter switch
is in the ACC position.
Display modes - see page 40.
Picture no: s0013428.tif
Interior courtesy lights
Front reading lights, centre dome lights
and luggage compartment lights function
as courtesy lighting and illuminate when
the doors or tailgate are opened.
If d oors or tailgate rema in op ened, the
lights stay illumina ted for app rox.
10 minutes.
Once all doors and the tailga te are closed,
the courtesy lights dim gradually after
app rox . 1 0 se conds.
By pressing button d in the roof lining,
both front reading lights and the centre
dome lights illum inate.
Press the button a gain to turn the lights off.