Operation Manual

Lighting 89
Dipped / main beam, headlight
flash
See page 12.
Turn signals, hazard warning
lights
See pages 13, 14.
Rev ersin g lights
Illuminate when reverse gear is enga ged
and ignition is switched on.
Centre high mounted stop light
Illuminates when the brakes are applied,
acting as a third stop light, to supplement
the b ra ke lig hts.
Picture no: s0013591.tif
Automatic dipped beam
activation 3
Light switch to AUTO: Dipped beam
illuminates automatically when the engine
is running, depending on outside light
conditions.
Automatic dipped beam activation can be
turned off by turning the light switch to
positions 8 or 9.
However, for reasons of safety, the light
switch should always remain in the AUTO
position.
To ensure automatic dipped beam
activation functions properly, do not cover
the light sensor on top of the instrument
panel.
Picture no: s0013545.tif
Headlight range adjustment q 3
With dipped beam switched on, adjust
hea dlight range to suit vehicle load.
Correct adjustment of the headlight range
reduces dazzle for other road users.
z Front seats occupied = 0
z All se ats occupied = 1
z All se ats occupied a nd
load in luggage compartment = 2
z Driver’s seat occupied and
load in luggage compartment = 3