Operation Manual

Safety systems82
Picture no: s0013563.tif
Mounting brackets for ISO-FIX
child restraint systems 3
The brackets located between the backrest
and seat cushion are used for mounting
ISO -FIX child restraint sy ste ms.
The instructions accom panying the ISO-FIX
child restraint system are to be expressly
followed.
Only ISO-FIX child restraint systems
approved for the vehicle may be used. We
recommend that you consult your Vauxhall
Authorised Repairer.
Picture no: s0013427.tif
Anchors for Top-Tether child
restraint systems 3
The top tether anchors located on the rear
of the backrests are designed to hold child
restraints which come equipped with top
tether anchor attachments only.
Please be sure to follow the instructions
provided with the Top-Tether child
restraint system.
For use of ISO-FIX and Top-Tether fixings,
universal ISO-FIX child restraint systems
may be used. We recommend that you
consult your Vauxhall Authorised Repairer.
Child restraint systems 3
Vauxhall child restraint systems are
designed specifically for your vehicle and
thus provides optimum safety for your child
in the event of an impact. The use of a
Vauxhall child restraint system is therefore
recommended.
If a different child safety seat is used, follow
the manufacturer’s instructions for fitting
and use.
Selecti ng the right sy st em
Your child should be transported facing
rearwards in the vehicle as long as
possible. The child’s neck area is still very
weak and in an accident they suffer less
stress in the semi-prone rearward position
than when sitting upright.
9 Wa rnin g
Disregard of these instructions may lead
to injuries or endanger life.