Operation Manual

Instruments 27
p
Alternator
Illuminates when ignition is sw itched on.
Goes out after engine is started.
If illuminated during driving:
Stop vehicle and switch off engine. The
battery is not being charged and the
engine cooling may be interrupted. The
brake servo unit may cease to be effective.
Interrupt your journey immediately.
Remove key and check drive belt condition
and tensioning before consulting a
workshop.
Z
ZZ
Z
Exhaust emissions
Illum inates when ignition is switched on.
Goes out after engine is started. Can
illuminate briefly when driving; this is
normal and does not indicate a system
fa ult.
If it illuminates when the engine is running:
Fault in emission control system . The
permitted emission limits may be
exc eeded. Fue l economy and vehic le
driveab ility may be impaired .
The control indicator also illuminates if
there is a fa ult in the diesel particle filter 3.
Consult a workshop as soon as possible.
If it flashes when the engine is running:
For a fault that ca n lead to destruction of
the catalytic converter, see page 130.
Consult a workshop as soon as possible.
WINTER (or n)
Wi nt er program me 3
Control indica tor illuminates in instrument
cluster when Winter programme for the
automatic transmission is enabled -
see p age 111.
Picture no: s0013485.tif
Fuel gauge
Indicates fuel level when the ignition is on.
After adding fuel and restarting engine,
fuel g auge p ointer slowly moves to show
new fuel level.
Movement of fuel in tank when cornering,
braking or accelerating may cause the
pointer to m ove temporarily.
When fuel gauge indicates that fuel supply
is low, control indicator Y illuminates:
Fill up fuel tank as soon as possible -
see page 127.
Never let the fuel tank become empty.