Operation Manual

Service plan, maintenance188
Coola nt temperat ure
Control indicator W illuminates when
coolant temperature is too high. Check
coolant level:
z Coolant level low:
Top up coolant. Pay attention to the
instructions given under "Anti-freeze and
corrosion protection" and "Coolant level"
on the previous page. Have the cause of
coolant loss remedied by a workshop.
z Coolant level OK:
Have the cause of increased coolant
temperature remedied by a workshop.
Picture no: s0013652.tif
Brake fluid
Brake fluid level
The fluid level in the container must not be
higher than the MAX mark or lower than
the MIN mark.
Do not overfill the brake fluid reservoir as
this may cause an engine fire due to fluid
burning; risk of injury and damage to the
vehicle.
Use of some brake fluids could cause
damage or impair braking effectiveness.
Stay well informed. We recom mend that
you use Vauxhall-approved high
performa nce brake fluid.
Extreme cleanliness is important, since
brake fluid contamination can lead to
brake system malfunctions.
If brake fluid level is too low, brake system
control indicator 4 illuminates in the
instrument cluster - see page 22.
After correcting the brake fluid level, have
the cause of the loss reme died by a
workshop.
9 Warning
Caution - b rake fluid is poisonous and
corrosive. Do not allow it to contact eyes,
skin, fabrics or painted surfaces. Direct
contact may cause injuries and da mage.