Operation Manual

Self-help 177
Picture no: s0013528.tif
Rear br ake, tail, turn signa l, reverse and
fog tail lig hts
1.Open the tailgate.
2. Remove 2 screws and light a ssemb ly.
3. Remove bulb holder by rotating it
anticlockwise.
4. Remove bulb from b ulb holder by
pressing the bulb in and rotating it
anticlockwise.
5. Install new bulb into bulb holder.
6. Reinstall bulb holder into light assembly.
Rotate bulb holder clockwise and ensure
it is s e cure .
Picture no: s0013529.tif
7. Replace light assembly by guiding lugs
on light assembly into their holes (see
black arrows in illustration).
8. Replace 2 screws removed earlier.
9. Close the tailgate.
Picture no: s0013530.tif
Number plate l ights
1. Remove 4 screws (arrowed) and remove
light covers.
2. Remov e bulb holder from light assemb ly
by rotating it anticlockwise.
3. Pull bulb straight out of bulb holder.
4. Install new bulb.
5. Reinsta ll bulb holder into light assembly.
Rotate bulb holder clockwise and ensure
it is secure.
6. Replace light covers using 4 screws
removed earlier.