Operation Manual

Self-help 175
If the headlights are damaged, the light
may not be sufficiently diffused and can
blind oncoming drivers. Vehicle vibration
can also cause incorrect headlight aiming.
Headlight aim ing
We recommend that headlight a iming be
carried out by your Vauxhall Authorised
Repairer, who will have special equipment
designed for the task.
On vehicles with manual headlight range
adjustm ent 3, carry out headlight aiming
with switch in position 0.
Picture no: s0013523.tif
Hea dlight dipped and ma in beam
1. Open bonnet, remov e fastener plug s
that hold down the rad iator upper cover
and remove the radiator upper cover.
2. Remove three bolts and headlight
assembly.
3. Remove headlight cap and harness
connector.
4. Release spring that retains the bulb and
remove bulb.
5. Install new bulb and reinstall bulb
retaining spring ensuring tha t bulb is in
correct orientation.
6. Replace harness connector and
hea dlight cap.
7. Replace three bolts and headlight
assembly.
8. Replace radiator upper cover, holding it
down with the fastener plugs removed
earlier and close bonnet.
Picture no: s0013524.tif
Parking lig hts
1.Open bonnet.
2. Remove headlight assembly.
3. Remove headlight cap.
4. Pull out bulb holder (loc ated next to
main beam bulb).
5. Remove bulb from bulb holder by pulling
it straight out.
6. Install new bulb.
7. Replace headlight cap.
8. Replace headlight assembly.
9. Close bonnet.
9 Wa rning
Xenon headlights operate at very high
voltage. Do not touch; high voltage can
be fatal. Have bulbs changed by a
workshop.