Operation Manual

In brief 13
Picture no: s0013478.tif
Headlight flash:
Pull stalk towards steering wheel
When released, stalk will spring back to rest
position.
Picture no: s0013480.tif
Turn signal lights:
Stalk in rest position
When the steering wheel is turned back, the
stalk automatically returns to its rest
position. This will not happen when making
a minor steering manoeuvre such as lane
changing.
Tap signal: Briefly move stalk to resistance
point. The turn signal then flashes three
times when changing lanes or the like.
Hold the stalk if you want the turn signals
to flash for longer. When released, the stalk
will spring back to rest position.
The volume of the turn signal lights’
audible warning is dependent upon vehicle
speed.
Picture no: s0013683.tif
Cruise control operation 3:
Press button on stalk
Switch on: press button :.
Store current speed: press button
9.
Switch off: press button
:.
Resume at stored speed:
press button
8.
6 Cruise control 3 - see page 137.
Upwards = Right turn
Downwards = Left turn