Operation Manual

Roof racks, caravan and trailer towing 155
Picture no: s0013520.tif
Inserting the coupling ball bar:
Insert the coupling ball bar into the
coupling housing and push firmly
downwards until the coupling ball bar
audibly engages.
If it does not engage, repeat fitting
proced ure.
Do not swing the coupling ball bar to the
left or right, or upwards and downwards, to
avoid disrupting correct fitting.
Picture no: s0013521.tif
Lock coupling ball bar by turning the
supplied key in the lock cylinder of the
coupling b all bar.
Remove key.
Important
Check tha t the coupling ball bar is correctly
attached:
z Green marking must be visible on lever.
z Coupling ball bar must be seated firmly
in coup ling housing.
Coupling b all bar must be locked and key
must be removed.
Eye for breakaway stopping cable
In the c ase of caravans / trailers with brake,
attach the breakaway stopping cable to
the eye - not the coupling bar.
9 Wa rnin g
Tow ing a caravan / trailer is only
permitted with a properly attached
coupling ba ll bar. If the coupling ball bar
cannot be properly attached, consult a
workshop.