Operation Manual

Brakes 14 7
Picture no: s0013689tif
Cont rol indica tor u for ABS
When the ignition is switched on, the ABS
control indicator illuminates for approx.
4seconds.
At the same time, the system performs a
self-check . When the c ontrol indicator
e xting uis hes , the sy ste m is read y for
operation.
If the control indicator does not illuminate
when the ignition is switched on, does not
go out after approx. 4 seconds, or if it
illuminates d uring driving, there is a fault in
the ABS . The vehicle's brak e system may
remain operational without AB S
regulation.
If ABS control indicator u illum inates
during driving along with brake system
control indicator 4 , there is a serious
fa ult in the brak e system. Have the syste m
checked immediately by a workshop.
Fault
You can continue driving, provided you
drive with care and anticipation.
Have the cause of the fault remedied by a
workshop. The system 's inte grated self-
diagnostics allows faults to be quickly
remedied.
9 Wa rnin g
If there is a fault in the ABS, the wheels
may tend to lock in the event of unusually
heavy braking. This may cause the
vehicle to sw erve. The benefits of the ABS
are lost.