Operation Manual

Climate control 105
Picture no: s0013554.tif
Autom atic m ode
Basic setting for maximum comfort:
z Pre ss AUTO button.
z Open all air vents.
z Set preselected temperature to 22°C
using rotary knob.
The temp erature can be set higher or low er
as desired.
All air vents a re actuated automatically in
automatic mode. The air vents should
therefore always be open - see page 98.
The control indicator in the AU TO button
illuminates when automatic mode has
been sele cted.
To switch the system off, set fan to x.
Temperature preset
The central rotary knob can be used to set
the temperature; 20 °C, 22 °C and 24 °C
appea r on the rotary knob. Intermediate
settings are possible.
Turn rotary knob clockwise to increase
temperature and anticlockwise to decrease
temperature.
The selected temperature is maintained.
At the lowest or highest temperature
setting, the system works at maximum
cooling or heating.
Temperature settings are stored when the
ignition is switched off.
Picture no: s0013555.tif
Manual settings
Under certain circumstances (e.g. iced or
misted windows), the functions of the
system can be modified manually.
System settings can be changed by
pressing the n button (control indicator in
button will illuminate) or by adjusting the
fan or air distribution mode rotary knob.
Automatic regulation of temperature,
airflow rate, air distribution mode, air
recirculation mode and air conditioning is
disabled.
To return to automatic mode:
press AUTO button.
Air distribution mode - see page 99,
airflow rate - see page 99,
air recirculation mode - see page 101,
air conditioning system - see pa ge 102.