Operation Manual

Seats, interior34
Picture no: s0013257.tif
Adjustment
The seat position can be adjusted by
means of switches on the outboard side of
the seat.
Adjusting the longitudinal position:
Move front switch forwards/backwards.
Height adjustment:
To adjust height of front part of seat
cushion, push front part of switch up/down.
To adjust height of rear part of seat
cushion, push rear part of sw itch up/down.
To adjust height of entire seat cushion,
push both front and rear parts of switch
up/down.
Picture no: s0013461.tif
Seat backrest adjustment:
Move upper part of rear switch forwards/
backwards.
Operate switch until desired seat position is
reached. Seat position - see next column.
After adjusting the seat, adjust height of
seat belt - see page 43.
The seat backrest must not be tilted back
too far (recommended maximum tilting
angle approx. 25°).
Seat position
Adjust driver’s seat such that, with the
driver sitting upright, the steering wheel is
held in the area of its upper spokes with the
driver’s arms slightly bent.
Slid e front passenger’s seat as far back as
it will go.
The seat backrests must not be tilted back
too far (recommended maximum tilting
angle approx. 25°).
9 Warnin g
Important: Do not sit nearer tha n
10 inches (25 cm) from the stee ring
wheel, to p ermit safe airbag deployment.
Disre gard ca n lead to injuries which c ould
be fatal. Vehicle passengers must be
informed accordingly.