Operation Manual

Self-help, vehicle care 18 3
Picture no: s0014625.tif
Xenon headlight system 3
Halogen headlights A can be identified
from Xenon headlights B by the d ifferent
lens layout.
Picture no: s0014626.tif
Pa rking lights
1. Remove headlight assembly -
see page 181.
2. Rotate bulb holder anticlockwise and
withdraw bulb holder from light
assembly.
3. Remove bulb from bulb holder by pulling
it straight out.
4. Install new bulb, using a lint-free cloth to
hold bulb.
5. Reinstall bulb holder in light assembly by
rotating it clockwise.
6. Reinstall hea dlight assembly.
Picture no: s0014627.tif
Front turn signa l light s
1. Remove headlight assembly -
see page 181.
2. Rotate bulb holder anticlockwise and
withd raw bulb holder from light
assembly.
3. Press and rotate bulb anticlockwise to
remove it from bulb holder.
4. Install new bulb into bulb holder by
pressing and rotating it clockwise.
5. Reinsta ll bulb holder in light assembly by
rotating it clockwise.
6. Reinstall headlight assembly.
9 Wa rning
Xenon headlights operate at very high
voltages. Do not touch; risk of fatal injury.
Have dipped beam and main beam
repaired by a workshop only.