Operation Manual

Self-help, vehicle care182
Picture no: s0014623.tif
Halogen headlight system
Dipped and ma in beam
Main beam 1 (inner bulbs) and dipped
beam 2 (outer bulbs).
1. Remove headlight assem bly -
seepage181.
2. Remove headlight cap.
3. Release bulb retaining spring and
remove bulb from reflector housing.
4. When fitting a new bulb, ensure the lugs
engage correctly with the rec esses on the
reflector. Do not touch the glass.
5. Engage bulb retaining spring and
replace headlight cap.
6. Reinstall headlight assembly.
Picture no: s0014631.tif
Pa rking lights
1. Remove headlight assembly -
see page 181.
2. Remove headlight cap and withdraw
bulb holder (located next to main beam
bulb) from light assembly.
3. Remove bulb from bulb holder by pulling
it straight out.
4. Install new bulb, using a lint-free cloth to
hold bulb.
5. Reinstall bulb holder in light assembly
and replace headlight cap.
6. Reinstall hea dlight assembly.
Picture no: s0014632.tif
Front turn signa l lights
1. Remove headlight assembly -
see page 181.
2. Rotate bulb holder anticlockwise and
withd raw bulb holder from light
assembly.
3. Press and rotate bulb anticlockwise to
remove it from bulb holder.
4. Install new bulb into bulb holder by
pressing and rotating it clockwise.
5. Reinsta ll bulb holder in light assembly by
rotating it clockwise.
6. Reinstall headlight assembly.