Operation Manual

Self-help, vehicle care 18 1
Bulb replacement
Before replacing a bulb, switch off ignition
and relevant switch.
Only hold new bulbs at base! Do not touch
the bulb glass with bare hands, otherwise
fingerprints on the glass evaporate and
residue builds up on the reflector
eventually resulting in a dull reflector.
Inadvertently stained bulbs may be
cleaned with a clean lint-free cloth, using
alcohol or white spirit.
Replacement bulb must be in accordance
with data on base of defective bulb. Do not
exceed wattage given on bulb base.
Hea dlight aiming
We recommend that headlight aiming be
carried out by a workshop, which will have
special equipment.
When aiming your headlights, the manual
headlight range adjustment 3 must be set
to 7.
Picture no: s0014624.tif
Head light removal
For bulb replacement, it is necessary to first
remove the headlight assembly.
1. Switch off ignition and headlight switch.
2. Open the bonnet, release the 11
retainers and remove the radiator cover.
3. Remove 3 bolts and withdraw headlight.
4. Depress harness connector tags and
disconnect headlight wiring.
5. Remove the headlight assembly.
Headlight assembly installation is the
reverse of removal - ensure locating dowel
aligns with its socket.
Do not overtighten bolts or retainers.
No. C ircuit Rati ng
22
Electric seat 30 A
23
Battery 60 A
24
Defogger 30 A
25
Dipped beam (left side) 15 A
26
Dipped beam (right side) 15 A
27
Parking light (left side) 10 A
28
Front fog lights 15 A
29
Main beam 15 A
30
Rear wiper 20 A
31
--
32
Headlight wash 20 A
33
Transmission control
module
15 A
34
Trailer / parking light
(left side)
10 A
35
Sp are 25 A
36
Sp are 20 A
37
Sp are 15 A
38
Sp are 10 A