Operation Manual

Driv in g and op e ra tio n162
Picture no: s0013520.tif
Inserting the coupling ball bar
Insert the coupling ball bar into the
coupling housing and push firmly
downwards until the coupling ball bar
audibly engages.
If it does not engage, repeat fitting
procedure.
Do not swing the coupling ball bar to the
left or right, or upwards and downwards, to
avoid disrupting correct fitting.
Picture no: s0013521.tif
Lock coupling ball bar by turning the
supplied key in the lock cylinder of the
coupling ball bar.
Remove key.
Important
Check that the coupling ball bar is correctly
attached:
z Green marking must be visible on lever.
z Coupling ball bar must b e seated firmly
in coup lin g hous ing.
Coupling ball bar must be locked and key
must be removed.
Eye for breakaway stopping cable 3
In the case of caravans / trailers with
brakes 3, attach the breakaway stopping
cable to the eye - not the coupling ball bar.
9 Warnin g
Tow ing a caravan / trailer is only
permitted with a properly attached
coupling ba ll bar. If the coupling ball bar
cannot be p roperly attached, consult a
workshop.