Operation Manual

Driving and o peration 157
Picture no: 18455S.tif
Tighten the attachment screw for the pedal
bearing mount to its maximum point.
Secure both bicycle wheels to wheel
recesses using strap retainers.
Check the bicycle to make sure it is secure.
The settings for the wheel recesses and the
rotary lever on the pedal crank recess
should be noted and saved for each
bicycle. Correct presetting will facilitate
refitting of the bicycle.
Picture no: 18456S.tif
Rem oving a bicycle from t he Flex-Fix
sy ste m
Undo strap retainers on both bicycle tyres.
Hold on to the bicycle, loosen the
attachment screw for the pedal bearing
mount, then lift the pedal bearing mount to
re mo ve it.
Remove bicy cle from the Flex-Fix system .
Picture no: 18357S.tif
Retracting the Flex-Fix system
Push the pedal crank mounts into the
pedal crank recesses.