Operation Manual

Driv in g and op e ra tio n116
Picture no: s0013632.tif
Fault Z
If a fault occurs in the automatic
transmission, control indicator Z will
illuminate in the instrument cluster.
Automatic shifting may be much harsher
than norm al or, in the case of a serious
fault, cancelled altogether.
Consult a workshop as soon as possible to
have the cause of the fault eliminated.
Picture no: s0013645.tif
Interruption of p ower supply
The clutch is not disengaged if the vehicle
battery is discharg ed and a gear has been
selected. The vehicle cannot move.
If the battery is flat, the selector lever
cannot be moved out of position P or N.
Start the vehicle using jump leads -
see page 168.
If the cause of the interruption to the power
supply is not a discharged battery, release
selector lever:
Have cause of power supply interruption
remedied immediately. Consult a
workshop.
1. Turn off ignition and remove key.
2. Depress and hold footbrake.
3. Remove cap on console with a suitable
screwdriver.
4. Insert ig nition key and press gently into
shift lock release slot.
5. Shift to neutral (N).
6. Remove key from shift lock release slot.
7. Start engine and shift to chosen gear.
8. Reinstall cap on console.