Operation Manual

Climate control 10 3
Picture no: s0013618.tif
Vent ilation
z Turn air recirculation mode 4 off.
z For maximum ventilation to head area:
set air distribution rotary knob to M.
z For ventilation to footwell:
set air distribution rotary knob to K.
z For simultaneous ventilation to head
area a nd footwell:
set air distribution rotary knob to L.
z Turn temperature rotary knob to blue
area for cooling.
z Set fan to desired speed.
z Open adjustable centre and side air
vents.
Heating
The amount of heat is dependent on the
engine temperature and is thus not fully
attained until the engine is warm.
For rapid warming of the passenger’s
compartment:
z Activate air recirculation mode 4.
z Set the air distribution rotary knob to
K or L .
z Turn temperature rotary knob to red
area for warm air.
z Set fan to 4.
z Open ad justable side air vents.
Do not use this setting for extended
periods, as gradual deterioration in air
quality and an increase in humidity may
cause windows to mist up.
To obtain a temperature for a "cool head
and warm feet" effect:
z Turn air recirculation mode 4 off.
z Set the air distribution rotary knob to L .
z Turn temperature rotary knob to the
middle.
z Set fa n to desired speed.
z Open adjustable centre and side air
vents.
The comfort and general wellbeing of
vehicle occupants are to a large extent
dependent on a suitab le ventilation a nd
heating setting.