Technical data

PLUG AND GO

Charging the Ampera battery is simple.

Just plug one end of the charge cable into

the charge port on the passenger side

front wing, and the other into a 240-volt

socket on a separate circuit* or the

accessory home charge station**, and you

can charge the vehicle at home. Or if

you’re out and about you can plug in at a

suitably equipped public charge station

using a Mode 3 charge cable

††

To make sure charging goes without a hitch, the Ampera’s

charge cable is fitted with LED status indicators. If all the

lights are green you know it’s safe to go ahead and charge

the Ampera. If any flash red, due to voltage or other

electrical outlet faults, the car won’t charge. In the cabin, a

light mounted on the facia just inside the windscreen shows

the charge status.