Extra Information

8 Introduction
Voice guidance
To adjust the volume of voice
guidance prompts:
1. Press the CONFIG button to enter
the menu features. Turn the
TUNE/MENU knob until Nav
displays. Press the TUNE/MENU
knob to select Nav or press the
Nav screen button to display more
options within that feature.
2. Press Voice prompt.
3. Press Voice volume.
4. Press + or – screen buttons to
increase or to decrease the
volume of the voice prompts.
See Using the navigation system
3 49.
Cleaning the display
Note
Using abrasive cleaners when
cleaning glass surfaces, could
scratch the glass. When cleaning
the glass, use only a soft cloth and
do not spray cleaner directly on the
system.
Do not wipe the centre stack with
a volatile liquid such as paint thinner;
it could scratch the surface or erase
the characters on the buttons.
Overview (without navigation)
Keeping your eyes on the road and
your mind on the drive is important for
safe driving. The infotainment system
has built-in features intended to help
with this by disabling some features
when driving. A grayed-out function is
not available when the vehicle is
moving.
All functions are available when the
vehicle is parked. Do the following
before driving:
Become familiar with the
infotainment system operation,
buttons on the faceplate, and
touch-sensitive screen buttons.
Set up the audio by presetting
favorite stations, setting the tone,
and adjusting the speakers.
Set up phone numbers in advance
so they can be called easily by
pressing a single button or a single
voice command for vehicles
equipped with phone capability.
9 Warning
Taking your eyes off the road too
long or too often while using the
navigation system could cause
a crash and you or others could be
injured or killed. Focus your
attention on driving and limit
glances at the moving map on the
navigation screen. Use voice
guidance whenever possible.
Infotainment control buttons
The buttons on the faceplate are used
to start primary functions while using
the infotainment system.
VOL/m (Volume/Power):
1. Press to turn the system on and
off.
2. Turn to adjust the volume.