Extra Information

Introduction 69
Activating a setting
Turn the MENU-TUNE knob to mark
the desired setting.
Press the MENU-TUNE knob to
activate the setting.
Setting a value
Turn the MENU-TUNE knob to
change the current value of the
setting.
Press the MENU-TUNE knob to
confirm the set value.
The cursor then switches to the next
value. If all values are set, you are
automatically returned to the next
higher menu level.
Adjusting a setting
Turn the MENU-TUNE knob to adjust
the setting.
Press the MENU-TUNE knob to
confirm the setting.
Switching a function on or off
Turn the MENU-TUNE knob to mark
the function to be switched on or off.
Press the MENU-TUNE knob to
switch between the settings On and
Off.
Entering a character sequence
To enter character sequences, e.g.
PIN codes or telephone numbers:
Turn the MENU-TUNE knob to mark
the desired character.
Press the MENU-TUNE knob to
confirm the marked character.
The last character in the character
sequence can be deleted selecting
k on the display or pressing the P
BACK button. Pressing and holding
the P BACK button deletes the entire
entry.
To change the position of the cursor
in the character sequence already
entered, select ◀ or ▶ on the display.