Operation Manual

98 Instruments and controls
In the corresponding submenus the
following settings can be changed:
Languages
Selection of the desired language.
Time Date
See Clock 3 73.
Radio settings
See Infotainment manual for further
information.
Phone settings
See Infotainment manual for further
information.
Vehicle settings
Climate and air quality
Auto fan speed: Modifies the level
of the cabin airflow of the climate
control in automatic mode.
Climate control mode: Controls the
state of the cooling compressor
when the vehicle is started. Last
setting (recommended) or at
vehicle start is either always ON or
always OFF.
Auto rear demist: Activates
automatically rear heated window.
Comfort settings
Chime volume: Change the volume
of warning chimes.
Personalization by driver: Activates
or deactivates the personalisation
function.
Rear auto wipe in reverse:
Activate or deactivate automatic
switching on of the rear window
wiper when reverse gear is
engaged.
Park assist / Collision detection
Park assist: Activate or deactivate
the ultrasonic sensors.
Side blind zone alert: Changes the
settings for the side blind spot alert
system.
Exterior ambient lighting
Exterior lighting by unlocking:
Activate or deactivate the entry
lighting.
Duration upon exit of vehicle:
Activate or deactivate and change
the duration of exit lighting.
Power door locks
Auto door unlock: Activates or
deactivates the automatic door
unlocking function after switching
off ignition.
Auto door lock: Activates or
deactivates the automatic door
locking function after switching on
ignition.
Stop door lock if door open:
Activate or deactivate the
automatic door locking function
while a door is open.
Delayed door lock: Activates or
deactivates the delayed door
locking function.
Remote locking, unlocking, starting
Remote unlock feedback:
Activate or deactivate the hazard
warning flasher feedback whilst
unlocking.
Passive door unlock: Change the
configuration to unlock only the
driver's door or the whole vehicle
whilst unlocking.