Operation Manual

Storage 63
Removal
Remove floor cover to gain access to
the tool box 3 167, tyre repair kit
3 173 and bulb replacement of tail
lights:
■ Lift up and fold rear part to the front,
■ pull out the cover to the rear, it will
be lifted a little by a guidance,
■ detach cover from the load
compartment.
To gain access to the right cover in
the load compartment, e.g. for bulb
replacement, fold down rear right
backrest and pull out the tool box
beside the subwoofer. Bulb
replacement 3 158.
Installation
■ Install tool box if removed,
■ place floor cover in load
compartment,
■ move it slowly to the front taking
care, that the guiding bolts slide into
the attachments of the load
compartment and let the floor cover
lower in its position,
■ close the floor cover by folding the
upper part to the rear. Have it fixed
by the Velcro fastener,
■ fold up rear backrests.