Operation Manual

160 Vehicle care
Fit light assembly with the
retaining pins into the recesses of
the car body and tighten the
securing nut from the inside of the
load compartment. Pull the
circular gasket over the recess in
the lamp housing.
Close cover and engage.
Reversing light/rear fog light
Reversing light is located separately
on the right side in the bumper, rear
fog light is located left in the bumper,
respective vice versa for right hand
drive models. Description of bulb
changing is the same for both.
1. Undo screw and remove cover.
2. Undo screw and remove light
assembly from the bumper.
3. Disengage and remove the bulb
socket by turning anticlockwise.
4. Remove bulb by turning
anticlockwise a little and
withdrawing. Replace the bulb.
5. Insert the bulb socket into the
assembly and turn clockwise.
6. Attach light assembly into the
bumper and fix with the screw.
7. Insert cover into the bumper and
fix with the screw.